Follow Us On →

DS-2CD4085F-AP


cctv ip camera download
Download Product PDF

Product Features

  • 1/1.7” Progressive Scan CMOS
  • 4096 × 2160 @ 22 fps frame rate
  • Slow Shutter
  • Digital WDR
  • 3D DNR
  • -A: Auto Back Focus
  • -P: P-Iris
  • Audio/alarm I/O
  • Support 128 G on-board storage
  • DC12V / AC24V / PoE

Product Specifications Table
Brand Model DS-2CD4085F-AP
Camera
Image Sensor 1/1.7" Progressive Scan CMOS
Min. Illumination Color: 0.009 Lux @ (F1.2, AGC ON), B/W: 0.012 Lux @ (F1.2, AGC ON)
Shutter Speed 1s ~ 1/100,000s
Slow Shutter Support
Lens Mount C/CS mount
Auto-iris DC drive(-P: support P-Iris)
Day & Night IR cut filter with auto switch
Wide Dynamic Range DWDR
Focus -A: support ABF
Compression Standard
Video Compression H.264+/H.264/MJPEG
H.264 Type Baseline Profile / Main Profile / High Profile
Video Bit Rate 32 Kbps – 16 Mbps
Audio Compression G.711/G.722.1/G.726/MP2L2
Audio Bitrate 64Kbps(G.711) / 16Kbps(722.1) / 16Kbps(G.726) / 32~128Kbps(MP2L2)
Image
Max. Image Resolution 4096 x 2160
Frame Rate 50Hz: 22fps(4096 x 2160), 25fps(3840 × 2160, 1920 x 1080, 1280 × 720)
60Hz: 22 fps(4096 x 2160), 24 fps(3840 × 2160), 30 fps(1920 x 1080, 1280 × 720)
Third Stream Independent with Main Stream and Sub Stream, upto 50/60Hz: 10fps(1280 x 720)
Image Setting Rotate mode, Saturation, brightness, contrast, sharpeness adjustable through client software or web browser
Image Enhancement BLC / 3D DNR / ROI / Defog
Regional Cropping Support
Day/Night Switch Auto / Schedule / Triggered by Alarm In
Picture Overlay LOGO picture can be overlaid on video with 128x128 24bit bmp format
Network
Network Storage NAS (Support NFS, SMB/CIFS), ANR
Alarm Trigger Motion detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Security User Authentication, Watermark, IP address filtering, Anonymous access
Standard ONVIF, (PROFILE S, PROFILE G), PSIA, CGI, ISAPI
Interface
Audio 1-ch 3.5 mm audio in (Mic in/Line in)/out interface, 1 build-in Microphone
Interface 1 RJ45 10M/100M/1000M Ethernet port, 1 RS485 interface and 1 RS232 interface
Alarm 1 input, 1 output (up to DC24V 1A or AC110V 500mA)
Video Output 1Vp-p composite output (75 Ω/BNC)
On-board storage Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button Yes
Audio
Environment Noise Filtering Support
Audio I/O Support dual audio track, stereo
Audio Sampling Rate 16kHz / 32kHz / 44.1kHz / 48kHz
Smart Feature-set
Behavior Analysis Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection Cross a pre-defined virtual line
Intrusion Detection Enter and loiter in a pre-defined virtual region
Region Entrance Enter a pre-defined virtual region from the outside place
Region Exiting Exit from a pre-defined virtual region
Unattended Baggage Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal Objects removed from the pre-defined region, such as the exhibits on display
Exception Detections Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection
Recognition Face detection recognition
Statistics Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)
General
Operating Conditions -30°C – 60°C (-22 °F – 140 °F) Humidity 95% or less (non-condensing)
Power Supply 24 V AC ± 10%, 12 V DC ± 10%, PoE (802.3af)
Power Consumption Max. 6 W (Max. 9W with IR cut filter on)
Dimensions 69.8×58×145 mm (2.75” × 2.28” × 5.71”)
Weight 830 g (1.83 lbs)